Amongst Hysters main safety concerns is safety. It is why they offer numerous pieces of optional safety equipment which could be included to either the work place or the machine itself. Following the standards of OSHA, Hyster makes head and work lamps as well as both audible and visible warning devices.
According to OSHA and ASME B56.1 regulations, the only warning device needed on a lift truck is the steering wheel horn, which is a basic feature on all forklifts. Though forklifts are not required to have both visible or audible warning devices, there are several conditions where optional warning devices might be suitable. These factors are unique to each and every work place or work site and every situation should be considered individually.
For audible safety devices, which are most frequently motion alarms or back-up alarms, the main factor to consider is the level of noise produced by the alarm. First of all, the audible device needs to be distinguished from other types of noises in the work site and the noise has to be really loud to be heard in the work site, even if other kinds of machinery could be operating. The ability for workers to hear alarms and know where the sound is coming from could be compromised if employees are wearing hearing protection devices. If the alarms are too offensive or disruptive to employees, nearby businesses, or nearby residents, alarms may need to be disabled. If noise must be disabled, this must be able to happen readily. Regulations also need to be followed to make sure that noise levels do not exceed OSHA noise limitations.
Visible safety devices may include the common rotating, flashing or strobe lights. Things to consider with visible safety devices comprise whether or not these devices might be more suitable compared to audible devices. Driver distraction, workplace lighting and presence of reflective surfaces are main concerns to consider to make certain that safety devices are effective and do not pose a danger to drivers or other employees. Safety light colours must be different from background surfaces and other lights which are within the work place. Safety device positioning are really important. Lights should be able to clear any overhead obstacles. Light positioning should not cause the lights to reflect or shine into the operator's eyes, but shielding of the lights must not excessively obstruct the light's visibility to pedestrians.
Hyster has a range of optional lights to meet numerous application requirements like halogen lights and weather-resistant LED that hold up through shock and vibration as well. When it comes to head lamps and work lamps, OSHA has set standards to make working at night or in dark work areas safer. Directional lighting is required if the lighting on the truck produces less than 2 lumens per square foot. Hyster has a lot of options which will help increase visibility in low-light conditions.